Roly-Poly Bot!

A fun little bot to add flavor to your games!

This design was inspired by Camille Manet's KP-1 concept that was the grand-prize entry for the 2019 "Build My Droid" contest sponsored by the global robotic community FIRST, as well as Lucasfilm. Her design was massaged by the Lucasfilm prop shop into a physical model that appeared in the 2022 Obi-Wan Kenobi show.

-This model is scaled to approximately 1/48 and is suitable for various tabletop miniature games.

-You will receive all models to produce the poses shown in the pictures.

-You will receive multiple STL files in this purchase, with and without supports.

-This product contains digital files only - no physical items are offered unless specifically noted in the listing. Files are intended to be printed in an SLA printer and have been tested with an Anycubic Photon, 0.04mm layer height, bottom layer count 3, exposure time 8 seconds, bottom exposure time 30 seconds, light off delay 0 seconds, bottom light off delay 0 seconds, bottom lift distance 5mm, lifting distance 5mm, bottom lift speed 60mm/min, lifting speed 60mm/min, retract speed 150mm/min, Siraya Tech Fast resin and Siraya Tech Tenacious Resin mixed 75%/25% respectively. Print time approximately 5 hours. Be sure to clean thoroughly with 90% Isopropyl Alcohol and a soft tooth brush prior to curing to prevent residue washing out details.

- Upon purchase, the end-user agrees to use these products for personal use only.

- You may not: use these products for commercial purposes; resell these products after purchase (or any remixed derivatives); or share these products in any way.

THIS PRODUCT MAY BE A DERIVATIVE AND TRANSFORMED EXPRESSION OF EXISTING ART AND SHALL NOT BE USED IN PLACE OF ANY OFFICIAL PRODUCT OR COPYRIGHTED ART FORM.