Cantankerous Clanker!

This figure comes with 3 poses shown: tripod with caster wheel, bipod, and bipod rocket pose. There are two heads: with and without arms. All poses are pre-supported for quick printing.

Head is designed for magnetic attachment and can swivel - see below for details. The head and body are interchangeable with our R-Series Automaton heads, so you can mix and match and create a new unique automaton figure!

Individual parts are included (not supported) if you wish to kitbash or remix for your own personal use.

This figure may be used for casual play in tabletop games.

-You will receive multiple STL files in this purchase to create the shown poses, as well as individual part files. See pictures for details. This figure is designed to use 0.125" diameter by 0.060" thick neodymium magnets (quantity 2) glued into the head and body. Magnets must be purchased separately and can be found inexpensively on eBay.

-This product contains digital files only - no physical items are offered unless specifically noted in the listing. Files are intended to be printed in an SLA printer and have been tested with an Anycubic Photon, 0.04mm layer height, bottom layer count 3, exposure time 8 seconds, bottom exposure time 30 seconds, light off delay 0 seconds, bottom light off delay 0 seconds, bottom lift distance 5mm, lifting distance 5mm, bottom lift speed 60mm/min, lifting speed 60mm/min, retract speed 150mm/min, Siraya Tech Fast resin and Siraya Tech Tenacious Resin mixed 75%/25% respectively. Print time approximately 2 hours. Be sure to clean thoroughly with 90% Isopropyl Alcohol and a soft tooth brush prior to curing to prevent residue washing out details.

- Upon purchase, the end-user agrees to use these products for personal use only.

- You may not: use these products for commercial purposes; resell these products after purchase (or any remixed derivatives); or share these products in any way.

THIS PRODUCT MAY BE A DERIVATIVE AND TRANSFORMED EXPRESSION OF EXISTING ART AND SHALL NOT BE USED IN PLACE OF ANY OFFICIAL PRODUCT OR COPYRIGHTED ART FORM.