R-Series Automatons!

Heads are fully interchangeable via magnetic attachment and can swivel!

This figure may be used for casual play in tabletop games.

-You will receive multiple STL files in this purchase: base figure with and without supports. The quantity of files may change as options are added. See pictures for details. This figure is designed to use 0.125" diameter by 0.060" thick neodymium magnets (quantity 2) glued into the head and body. Magnets must be purchased separately and can be found inexpensively on eBay.

-There are two zip files: 95% scaled files that should blend well with existing tabletop game pieces. The original 100% files are still available, but newer options will only be available in the 95% archive.

-The Rev1 heads have been revised to help fit the bodies better and require less cleanup work after support removal.

-This product contains digital files only - no physical items are offered unless specifically noted in the listing. Files are intended to be printed in an SLA printer and have been tested with an Anycubic Photon, 0.04mm layer height, bottom layer count 3, exposure time 8 seconds, bottom exposure time 30 seconds, light off delay 0 seconds, bottom light off delay 0 seconds, bottom lift distance 5mm, lifting distance 5mm, bottom lift speed 60mm/min, lifting speed 60mm/min, retract speed 150mm/min, Siraya Tech Fast resin and Siraya Tech Tenacious Resin mixed 75%/25% respectively. Print time approximately 3 hours. Be sure to clean thoroughly with 90% Isopropyl Alcohol and a soft tooth brush prior to curing to prevent residue washing out details.

- Upon purchase, the end-user agrees to use these products for personal use only.

- You may not: use these products for commercial purposes; resell these products after purchase (or any remixed derivatives); or share these products in any way. 

THIS PRODUCT MAY BE A DERIVATIVE AND TRANSFORMED EXPRESSION OF EXISTING ART AND SHALL NOT BE USED IN PLACE OF ANY OFFICIAL PRODUCT OR COPYRIGHTED ART FORM.